How to Replace a Kia Sportage Replacement Key
The key of a lot of Kia models has an entry system that is keyless in. This key typically resembles the remote control and can be replaced with a fresh one from an Kia dealer or locksmith.
Key fobs are prone to malfunction due to various reasons, such as an empty coin battery, worn buttons signal interference, water damage, and a defective receiver module. Here are some helpful tips to help you get your Kia sportage replacement key working again.
How do you replace a remote key or smartkey
The battery inside your Kia's smart key will eventually require to be replaced, whether it's a remote, a push-to-start key or a standard metal key that doesn't have transponder. This is particularly the case if your car displays a message telling you that the smart or remote keys are not powered by batteries.
Luckily, this is a relatively simple process. To replace the battery in the key fob, remove the mechanical key from the slit on the back of the key fob. Then break the cover. Inside the key fob will be a small screw that holds the battery in the correct position. Remove the old battery by unscrewing the screw using the help of a small screwdriver. Install the new battery and close the gap on the key fob.
Once the key fob has new batteries and you've tested it, press the locks and unlock buttons. If the doors lock and unlock exactly as you expect, then you're in good shape! kia keys replacement can now utilize the hands-free feature to lock and unlock your Kia whenever your fingers become cold or you need to do some errands in Brandon.
Not all key fobs could need to be programmed (transponder chips or smart keys). This requires a computer that is available only to the locksmith for cars or dealer. Other keys (non transponder metal keys) are not required for programming. If you're looking to reprogramme your key, it is necessary to note the key code's number on the tag for the key code.
How to replace the battery
If the Kia key fob is unable to respond to pressing the lock/unlock button, it is most likely that the battery is depleted. A weak battery can cause other issues, such as the check engine light flashing on or the engine not cranking. Fortunately, replacing the key fob battery is a relatively simple DIY task that requires only a few basic tools.
Before you begin the process before beginning the process, ensure that your vehicle is off and all doors are shut. Find the small, metal or plastic piece on the bottom of your key fob and play with it until a metallic key is released. You can then insert this key into the driver's door handle to open your car.
To replace the battery in the key fob remove the rear cover. Utilize a plastic plier tool to loosen the latch that holds the black negative cable. Remove the old battery and then place the new battery to ensure its "+" side is facing you and the "-", negative side is facing the fob's electrical contacts. Push the new CR2032 battery straight into position and avoid excessive force to avoid damaging or bending the contacts made of metal.
Once the new battery has been installed and the key fob is turned on, turn it off and then turn it on in the ignition several times until the door locks. Then, test your Kia key fob and see if it is working properly again.
How can you replace the smart key?
You can have a standard keyfob, or a Smart Key, based on the model of Kia Sportage. The smart key is equipped with an embedded mechanical key blade, while the standard key fob does not. Both kinds of key fobs contain a battery inside them which eventually needs to be replaced. This is a simple procedure that takes just two minutes.
Be sure to turn off your Kia and sit on a flat, well-lit surface before you begin. Keep in mind that there are tiny components inside the fob that could be snagged if not careful.
The release button for the small size is located on the lower backside. It can be an oval silver button or a rectangular slot. When you press it mechanical key blade, it will appear and you will be able to open the key fob.
Once the key fob is opened, take out the battery that was in it. The new battery is a one called CR-2032 and can be bought through the internet or at a local auto parts shop. When you are done it should be possible to lock, unlock and start your vehicle using your key fob even if your engine isn't running!
How do you replace a mechanical key
The Kia key fob is a fantastic feature that lets us lock and unlock our car at the touch of an button. Like any other device like a key fob, the Kia might have issues. Luckily, there are steps to take to resolve these issues and ensure that our key fobs are in good working condition for the long term.
A dead or weak battery is one of the most frequently encountered issues. This could cause your device to stop working or work intermittently. If this is the case it is time to replace the battery a new one.
If this isn't enough to solve the issue, try using the flathead screwdriver that is standard to push the fob's casing made of plastic open. Be careful not to damage any internal components or scratch the plastic. Once the battery is removed, replace it with a new one.
When the new battery is in, shut and open the doors using the mechanical key (every key fob in the kia has an emergency mechanical key that can fit into the slot). Test the key fob to confirm it's functioning correctly. Contact a dealer locksmith to address the issue in the event that the fob is not working. Make sure they cut you an emergency key that functions for all trunk and door cylinders in order to avoid lockouts again.